Product Review

Glow in the Dark PLA Filament Review

Glow in the Dark PLA Filament Review

admin 18/06/2018 0
Printed by SunTop Glow in the Dark Silver White PLA Filament  Me every evening ????. . Glow in the Dark sponsored by @suntopx . I am really happy with this filament, by day it looks kind of like silk/marble, with a nice texture. It feels similar to w...
Read More
ABS Filament Review

ABS Filament Review

admin 15/05/2018 0
I actually have used your filament to print today, instead of 240c I ran it at 210c and instead of bed temp at 100c I ran at 85. I also slowed down my print speed by 50% (15mms) and have no issues. Prints just like the filament provided by the maker ...
Read More
ABS Filament Feedback

ABS Filament Feedback

admin 09/04/2018 0
The ABS filament I bought works very well with less warping --Tsung-Hsiang Hsueh...
Read More
PETG Filament Product Review

PETG Filament Product Review

admin 01/04/2018 0
Hey, today i just tested the amazing PETG from Suntop Filaments.Diameter is 1.75 +-0,1 à nice flowrate at 1,05 .PETG needs just a little bit more flow!I print the filament with a Heat bed at 60 degrees and 230 at the nozzle.I really like PETG, it is ...
Read More
TPU Flexible Filament Product Review

TPU Flexible Filament Product Review

admin 01/04/2018 0
After I reallised that I really need something for scratch marks for the wood I just bought the TPU from Suntop as well.Before I start printing with the TPU, I have to make some upgrades for my Extruder with Teflon tubes inside. You will need it, oth...
Read More
PLA Glow in the Dark Filament Review

PLA Glow in the Dark Filament Review

admin 01/04/2018 0
i had the opportunity to test your filaments, please see the pictures attached. Those are some of the tests we made, also some payed works we already have like those keychains, we were ordered 100 keychains for an opening petshop. I must say that the...
Read More
Silk Green PLA Filament Review-Mermaid

Silk Green PLA Filament Review-Mermaid

admin 01/04/2018 0
I used your green for my mermaid shower head and it turned out great! Attached is a little video of my prototype, I’m working with the designers to perfect it so we can launch it ASAP!  Mike Berger, Mar.13,2018...
Read More
Carbon Fiber Filament-Tevo Tornado control box housing

Carbon Fiber Filament-Tevo Tornado control box housing

admin 20/03/2018 0
This is a virtually flawless Tevo Tornado control box housing for an MKS board and touch screen. It’s printed at 0.25mm resolution at 60 mm/s and 220 deg C on a Tevo Tornado using Suntop carbon fiber PLA. I can’t be more impressed with this filament....
Read More
PLA Glow in the Dark Filament Review

PLA Glow in the Dark Filament Review

admin 05/03/2018 0
SunTop 1.75mm PLA Glow in the Dark Filament Review by Lydia Streccius  It’s done! i had lots of fun printing with this and I am definitely going to be printing with this amazing filament a lot more.I think I’m going to print some bionic arms for litt...
Read More
ABS Filament Review-USB Stick

ABS Filament Review-USB Stick

admin 04/03/2018 0
  Printer : Raise 3D N2+. (build size 300x300x600. X,Y,Z)Build plates : BuildTak, LokBuild and ordinary hardened glass, all with just some ordinary office glue stick on the bed.For PLA I always use heated bed (around 55-60 °C) and for ABS I close the...
Read More