3D Filament Troubleshooting

Clogged nozzle

admin 25/11/2019 0

Issue details: Clogged extruders happen. Here are why they happen, how to prevent them and what to do if you have one. Most full blockages will give you an early warning sign by under extruding first which signals a partial blockage.Clogged nozzles h...

ABS Filament Printing Troubleshooting: Insufficient Strength ABS

admin 13/06/2018 0

A print by abs filament but doesn't haven't the needed strength. As you can see in the picture, the print is weak. The picture shows an insufficient strength of a printed abs object, possible root cause could be insufficient printing temperature. A 3...

Say No To Stringing / Oozing

admin 07/11/2017 0

PLA filament is the most common 3d printing filament due to its ease of printing and environmental friendly. Therefore, most end users choose it over ABS filament, but PLA filament has a disadvantage that ABS filament hasn't - Stringing or Oozing. To...

How To Prevent Warping

admin 15/10/2017 0

Why Warping Happens Warping problem occurs during 3D printing when the printing object is cooling after printing. Cooling causes stress along the object's lateral surfaces. The stress applied on sides causes the corner of the object to pull up and de...